List of products by brand 3M

The 3M™ 62286 Disk pad allows you to quickly and easily change hacksheets while performing multi-step tasks.
The hook & loop system allows reuse of the disc for the entire life of the abrasive.
M14 threaded for use with angular wheel

Full face mask with wide field of view
Extremely lightweight: 450 grams
Mask made of soft hypoallergenic elastomeric material
6000 series filters - 5900 series prefilters


3M™ Reusable Respirators Brochure

Replacement Exhalation valve for full face mask 6800

3M 734 Aggressive fast cutting waterproof silicon carbide paper, for use on paints, lacquers and fillers. Paper backed, A/C weight. Size: 230mm wide x 280mm length.

The 3M Series 7500 Reusable Face Masks have set a new standard in comfort. Reduced breathing resistance helps minimize heat build up in the mask while increasing your comfort. Available in three sizes, all masks include the 3M ™ Bayonet Filter Clamp System that offers a wide range of dual lightweight filters for gaseous, vapor and particulate protection, tailored to your particular needs and can also be used with the Air 3M ™.It is combined with Filters A1, A2, ABE 1, ABEK1, P1, P2SL, P3SL, and the prefilter cap.Headband belts

Balanced, safe application
Reduced pressure and tension points
Compatible with 3M Helmets and Glasses

Soft silicone mask for comfort and durability

Thin nasal cap for more comfort
Fully conservative
Lightweight, weighing 136 grams


3M ™ Cool Flow ™ Exhaust Valve

Less accumulation of heat and sweat
It reduces the vibrations of the valve
Flow of exhaled air down
Remains clean


Low Profile Design

Minimizes interference with the field of view
Reduces dust collection points
Reduces blur with protective glasses


Dual Filter design that provides low breathing resistance

Better weight distribution resulting in better balance
Enhanced perimeter visibility
Flexible system for gas, vapor and particulate filters


Soft silicone material for extra comfort

Adjustable headband, easy to attach neck strap
Cool Flow 3M ™ Exhalation Valve ™ provides easier breathing by reducing heat and moisture build-up
Armored exhalation valve system for heat and dust protection

Note: Filters are not included

3M™ 7581 Replacement retaining straps for half face mask 7502-7503

3M™ Reusable Respirators are designed to be reused many times and a range of spare parts is available to help keep your respirators in good working order and extend the effective service life of the respirator. Replacement filter holders are available for some 3M Reusable Respirators and can be fitted by a trained user or a service center, if the original filter connection holder becomes damaged.

        Replace a damaged or worn filter holder
        Specially designed for use with 3M™ Reusable Respirators
        Quick and easy to fit
        Increases the effective service life of your equipment
        For use with 3M™ Reusable Half Face Mask 7500 Series

10 per pack
Standard Resistant
Outside cover plates protect the outside of your 3M™ Speedglas 100 Welding Helmet Series auto-darkening lens from sparks and splatter
It is recommended to replace outside cover lenses every 15 days depending on usage
Suitable for use with the Speedglas 100 Series
Cover lens dimensions 86 x 145mm

 

3M™ 834010 Replacement breathing tubes for 3M™ Speedglas™ Supplied Air System and 3M™ Adflo™ Powered Air Respirator.

Replacement breating tubes for 3M™ Welding Respiratory Equipment 
Connects welding helmet to the powered air purifying respirator or supplied air unit
For highest possible safety and comfort, regularly check your equipment for worn or damaged parts.

3M™ Adflo™ Leather Belt, 835000, is designed for 3M™ Adflo™ Powered Air Respirator. Our spare part replaces worn or damaged belts.

 Replaces worn or damaged 3M™ Adflo™ belt.
 Large surface area evenly distributes weight.
 Leather construction for increased durability.
 To increase service life, make it a habit to check your equipment regularly.
 For use with 3M™ Adflo™ Powered Air Respirator.

3M™ Ultra Durable Floor Marking Tape 971 is comprised of a Polylactic Acid (PLA) backing with a rubber adhesive. The tough, thick PLA backing resists pallet drag and high forklift traffic. This tape is designed for long-term floor marking, yet can still come up clean, in one piece, after several years on the floor.

Polylactic Acid (PLA) backing with a rubber adhesive designed for heavy traffic areas
Backings maintain vivid color even when exposed to heavy abrasion from pallets or heavy equipment like forklifts
Unique adhesive provides a strong bond yet promotes one-piece clean removal
Ideal for 5S lean manufacturing initiatives

The price listed is per meter

• Efficient particulate filter protects against FFP2 (NPF 12) levels of dust, mist and metal fumes
• Activated carbon layer filters out ozone gas generated by MIG, TIG and ARC welding operations
• Specially treated outer shell offers increased flame retardancy to help minimise the effect of hot welding spatter
• Filter resists clogging for extended use against welding fume
• 3M™ Cool Flow™ Valve helps to provide comfortable protection in hot and humid conditions
• Robust shell and cup design is collapse resistant and conforms well to different face shapes and sizes
• Adjustable braided headband helps provide comfort to the face, head and neck

Replacement battery charger for the upgraded Lithium-Ion battery (part number 833111)

Charges the standard lithium-ion battery in 4.5 hours
Charges the heavy duty lithium-ion Adflo battery in 5.5 hours
Only suitable for use with the 3M™ Speedglas™ Lithium-Ion battery (grey battery)

Prevents sparks from entering the Adflo™ PAPR unit
Check your spark arrestor regularly and assess for any damage
Replace immediately if any damage is evident

9100 FX-Air, 9100 MP, 9100-Air

Pack of five
The particle pre-filter is always used in combination with a particle filter (837012)
Regular replacement of the Adflo™ pre-filter extends the life of the particle filter, saving money while also increasing the Adflo battery run-time
Inspect your pre-filter regularly for any damage, clogging or breakthrough
Replace once to twice a week depending on use

Pack of 2 of replacement particle filters for the 3M™ Adflo powered air purifying respirator system (837012)

Adflo particle filters provide high level protection against harmful particulates as you weld
Adflo particle filter should always be used in conjunction with a pre-filter (part number 836010)
Replace when particle filter indicator becomes red or when battery life starts to shorten

Prevents nuisance level organic vapour, acid gas and SO2
A pre-filter and particle filter must be used at all times
Replace according to regulations at your workplace
Smell and taste are not reliable indicators of when you should change the filter.

Lithium ion batteries make the Adflo ™ Air Delivery System even lighter and more balanced for greater comfort throughout the shift.
It fully recharges in 4.5 hours. The expected running time is 8 hours with new particulate filter, new fully charged battery and standard airflow.
The batteries can be stored in the charger, fully charged, ready for immediate us

Lithium ion batteries make the Adflo ™ Air Delivery System even lighter and more balanced for greater comfort throughout the shift.
It fully recharges in 5.5 hours. The expected running time is 10-13 hours with new particulate filter, new fully charged battery and standard airflow.
The batteries can be stored in the charger, fully charged, ready for immediate us

3M™ Chemical Sorbents are made from inert, synthetic fibers principally of polypropylene. Lightweight and dust free, they have a high absorption capacity which minimizes the amount of waste for disposal.

Fast and effective containment and clean-up
Suitable for use with most chemicals
Promotes safety on the site

3M™ Chemical Sorbent Multi-Format combines the convenience and versatility of four sorbents in one. Offering high absorbency, rapid deployment and resulting in less wastage. Use closed, the Multi-Format acts as a boom; unfold once and it's a pillow or open it right out to use it as a pad or sheet. Supplied in a convenient dispenser pack, the sorbent is perforated at 40 cm intervals - simply tear off the required amount.

Sorbent multi-format combining the convenience and versatility of four sorbents in one (use as a boom, pillow, pad or roll) to catch leaks and drips. 
Fast and effective containment and clean-up. Folded sorbent (120 mm wide by 15.2 m length) sorbs 38 litres in total
Suitable for use with most chemicals.
Promotes safety on the site.
Easy to dispose off.

High capacity chemical sorbent pads have a scrim on one side to increase strength and eliminate linting. Pads allow the user to quickly spread sorbent on and in the path of a spill. May also be used on a work surface in anticipation of a spill or as a wipe.

Sorbents & Spill Management
Fast and effective containment and clean-up
Suitable for use with most chemicals
Promotes safety on the site
Easy to dispose off
Chemical Spillage Sorbents

Use 3M™ Hookit™ Clean Sanding Hook Saver our inexpensive attachment replaces and protects the hooks on a new Hookit™ Disc Pad.

Used in place of an expensive disc pad during applications
Protect hooks on a new Hookit™ Disc Pad
Suggested Applications: Use to protect new Hookit™ Disc Pad

Diameter: 150mm

3M™ Cubitron™ II Cloth Belt 984F offers revolutionary performance with 3M Precision-Shaped Grain on a YF-weight polyester cloth backing. This high-performing belt contains a grinding aid, making it ideal for medium to high pressure applications on stainless steel and other exotic alloys, along with carbon steel, cobalt chrome, and nickel alloys.
 

3M Precision-Shaped Grain continuously fractures into sharp points that cut exceptionally fast, helping increase productivity
Engineered to run cooler, reducing metal discoloration/oxidation and the chance of heat related stress cracks
Reduces changeouts and downtime in robotic and pressure-assisted applications
Belt life is significantly longer, producing more parts per belt and requiring fewer belt changes
YF-weight backing excels in medium/high pressure stainless, cobalt chrome and nickel alloy applications.