Spare Parts

 TR-6310 A2P use in environments with high rates of hazardous particles and gases, for use with the 3M Versaflo Powered Air Turbo TR-600 Series.

The filter cover TR-371 is a replacement part for the 3M Versaflo TR-300 PAPR. The filter cover provides protection for the filter and provides a housing for a pre-filter and/or a spark arrestor

3M™ Speedglas™ Headband 9100, 533000 is a replacement part for use with 3M™ Speedglas™ Welding Helmet 9100 Series. Our headband is highly adjustable and comes with assembly parts. Fits head sizes 50 to 64.

Adjustable, comfortable headband
For use with 3M™ Speedglas™ Welding Helmet Series 9100
Includes assembly parts
Smooth ratchet for precise tightening
Fits head sizes 50 to 60
Check your equipment regularly to increase service life

TR-329 Suspenders are designed for use with all 3M™ Versaflo™ TR-300 and Speedglas™ TR-300-SG belts.

For use with certain 3M Versaflo TR-300 PAPR configurations
May reduce weight of blower unit around the waist

3M™ Versaflo™ Cleaning & Storage Kit, TR-653 is our kit to assist with safely cleaning and storing 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series. It comes with one inlet plug and two inlet seals, one outlet plug and two outlet seals, and one battery connector cover.

Enables cleaning and storing 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series unit easier
Kit comes with one inlet plug, two inlet seals, one outlet plug, two outlet seals, and one battery connector cover
Turbo plugs allow turbo unit TR-600 to be submerged or rinsed under running water as outlined in the user instructions
Plugs can help keep the internal components of the turbo clean during storage
Plugs and seals should be replaced when worn or damaged or after 30 uses

Designed to be used with our TR-600 and TR-800 Series Powered Air Purifying Respirators (PAPRs), these filters help provide respiratory protection from a broad range of airborne including certain particulates.

High efficiency filter
Convenient package size
Simple to install.

The TR-632 is a light weight, high capacity, lithium-ion battery pack for TR-600 series PAPRs. It charges quickly, and features a charge level indicator.

Long run time for filters and cartridges.
Provides longer run times than standard battery.
Rinsable
Dunkable for easy cleaning.
Easy determination of charge level.
Easy to install on PAPR.

3M™ Speedglas™ Headband 100/9000/SL, 706000 is designed for use with 3M™ Speedglas™ Welding Helmets 100, 9000, 9002NC and SL. Our spare part replaces worn or damaged headband assembly parts.

Replaces worn or damaged headband assembly parts
For use with 3M™ Speedglas™ Welding Helmets 100, 9000, 9002NC or SL
Ensures you get the correct level of comfort and protection
Check your equipment regularly to increase service life
Use for welding applications

pack of 5.
Inside cover lenses protect the inside of the 3M Speedglas helmet welding lens from scratches,sweat,wear & tear
Recommended replacement time is once a month depending on use.
Suitable for use with the Speedglas 9100V
Πλάκα σήμανσης 117x50.

• Efficient particulate filter protects against FFP2 (NPF 12) levels of dust, mist and metal fumes
• Activated carbon layer filters out ozone gas generated by MIG, TIG and ARC welding operations
• Specially treated outer shell offers increased flame retardancy to help minimise the effect of hot welding spatter
• Filter resists clogging for extended use against welding fume
• 3M™ Cool Flow™ Valve helps to provide comfortable protection in hot and humid conditions
• Robust shell and cup design is collapse resistant and conforms well to different face shapes and sizes
• Adjustable braided headband helps provide comfort to the face, head and neck

3M™ Versaflo™ Prefilter, TR-6600 is our prefilter which captures larger particles which may otherwise quickly clog 3M™ Versaflo™ Powered Air Turbo TR-600 Series particulate filters. It can be used with 3M™ Versaflo™ Spark Arrestor, TR-662 for additional protection.

Can extend the service life of TR-600 Series filters by capturing large particles
May reduce operating costs by extending the service life of TR-600 Series filters
Can be used in conjunction with a 3M™ Versaflo™ Spark Arrestor, TR-662
Maintenance free and should be discarded if clogged or damaged
Regular prefilter changeouts can improve system performance and may increase battery life


*Pack of 10

3M™ Versaflo™ Filter Cover, TR-6100FC is our filter cover to help protect 3M™ Versaflo™ TR-6110E and TR-6130E filters from physical damage.

Protects your 3M™ Versaflo™ TR-6110E and TR-6130E filters from physical damage.
Holds a 3M™ Versaflo™ Spark Arrestor, TR-662 or 3M™ Versaflo™ Prefilter, TR-6600 in place for further protection.
Enables 3M™ Versaflo™ Power Air Turbo to be worn through decontamination showers.
Enables turbo to be worn through decontamination showers.

3M™ Versaflo™ Peel-Off Visor Cover, Premium Hoods, S-922 is our transparent peel-off visor cover for use with 3M™ Versaflo™ Series S-600, S-700 and S-800 premium head covers and hoods. This self-adhesive cover protects the visor from contaminants and scratches. 

Protect visors from contaminants and scratches.
For use with 3M™ Versaflo™ S-600, S-700 and S-800 premium headcovers and hoods.
Prolong the condition of your visor.
Self-adhesive cover can be easily applied and torn off.

* 10 Piece per pack

3M™ Versaflo™ Flame Resistant Faceseal, M-937 is our replacement flame-resistant faceseal designed for use with 3M™ Versaflo™ M-100, M-200 and M-300 Series.





Replacement faceseal
Flame resistant
Easy to replace
Designed for use with 3M™ Versaflo™ M-100, M-200 and M-300 Series
Colour: Black
CE approved

Get a closer, clearer view of your weld with 3M™ Speedglas™ Magnifying Lenses Our lenses magnify objects by up to 3 times the normal power (depending upon model selected) and is designed for use with our Speedglas welding helmets. There’s a magnifying lens holder built into the welding filter of 3M™ Speedglas™ Welding Helmet Series 9100, making the lens installation easy and secure.

Give you a closer, clearer view of your weld.
Magnifies objects by up to 3 times the normal power.
Designed for use with Speedglas welding helmets.
Installation is easy and secure.

3M™ 834010 Replacement breathing tubes for 3M™ Speedglas™ Supplied Air System and 3M™ Adflo™ Powered Air Respirator.

Replacement breating tubes for 3M™ Welding Respiratory Equipment 
Connects welding helmet to the powered air purifying respirator or supplied air unit
For highest possible safety and comfort, regularly check your equipment for worn or damaged parts.

3M™ Speedglas™ Protective Head Cover can help provide extended protection for areas of the head and neck not covered by standard 3M™ Speedglas™ protective equipment.Compatible with Speedglas 100V & 9002NC.

3M™ Speedglas™ Protective Covers, Hoods, & Shrouds can help protect areas of the head and neck not covered by standard 3M™ Speedglas™ protective equipment.
Extended protection for the crown of the head, throat/neck, and/or ears during heavy welding or grinding applications.
Helps protect extended areas of the head and neck against UV light, sparks and spatter.
Accessories attach easily to 3M™ Speedglas™ Welding Helmets.
For assembly, facility maintenance, grinding, machine operations, sanding, and welding applications.
For highest possible safety and comfort, regularly check your equipment for worn or damaged parts.

3M™ Adflo™ Leather Belt, 835000, is designed for 3M™ Adflo™ Powered Air Respirator. Our spare part replaces worn or damaged belts.

 Replaces worn or damaged 3M™ Adflo™ belt.
 Large surface area evenly distributes weight.
 Leather construction for increased durability.
 To increase service life, make it a habit to check your equipment regularly.
 For use with 3M™ Adflo™ Powered Air Respirator.

3M™ Speedglas™ 169100 Protective Hood/Shroud can help provide extended protection for areas of the head and neck not covered by standard 3M™ Speedglas™ protective equipment.

3M™ Speedglas™ Protective Covers, Hoods, & Shrouds can help protect areas of the head and neck not covered by standard 3M™ Speedglas™ protective equipment.
Extended protection for the crown of the head, throat/neck, and/or ears during heavy welding or grinding applications.
Helps protect extended areas of the head and neck against UV light, sparks and spatter.
Accessories attach easily to 3M™ Speedglas™ Welding Helmets.
For assembly, facility maintenance, grinding, machine operations, sanding, and welding applications.
For highest possible safety and comfort, regularly check your equipment for worn or damaged parts.

The 3M™ Versaflo™ BT-30 Breathing Tube connects any Versaflo Headtop to any Versaflo air source. It features a flexible helix that adjusts to the appropriate length for the individual wearer.

3M™ Speedglas™ Magnifying Lens Holders enables you to attach a magnifying lens (sold separately) to your 3M™ Speedglas™ welding filter. Our lens holder forms part of the complete helmet assembly for welding applications.
 

Easily and securely attaches a magnifying lens to your 3M™ Speedglas™ welding filter
Attaches a magnifying lens (sold separately) for a closer, clearer view of your weld
Forms part of the complete helmet assembly for welding applications
Part of a range of Speedglas welding helmet accessories that help ensure your protection and comfort

Safely carry and store your 3M Welding equipment with 3M Speedglas™ carry products.
Protect your welding respiratory system from scratches with 3M Welding

Protects against scratches, moisture and dust.
For highest possible safety and comfort, regularly check your equipment for worn or damaged parts
Carry or store your equipment for best comfort or care

3M™ Versaflo™ Powered Air Respirator Filters, TR-6580E (ABE2K1HgP) these filters are for use with 3M™ Versaflo™ Powered Air Respirators TR-600 & TR-800 Series and a 3M™ approved headtop or facepiece. Filters are available in a range of options covering particulate only hazards, or for hazards containing a combination of gas, vapour and particulates.

Compatible with the 3M™ Versaflo™ TR-600 and TR-800 Powered Air Respirator systems.
Respiratory protection against dusts, mists, fumes and other particulate hazards, and a variety of gas and vapour hazards, including organic vapour, acid gas, inorganic gases, ammonia and mercury vapour.
Simple to install.
CE approved.
Replacement part.

 

3M Welding Earmuff has been specifically designed for use with welding helmets to provide protection against noise and hot debris during welding work. The earmuffs attach to welding helmets and neck supports, offering a convenient way to protect the user's ears without affecting the welding helmet.

The key features of the 3M Welding Earmuff include:

Noise Reduction: They offer noise reduction to protect the ears from loud sounds generated during welding and other related industrial activities. SNR: 24dB.

Compatibility: The earmuffs are designed to be compatible with a variety of welding helmets, making them a versatile choice for welders.

Protection from Heat and Debris: They help protect the ears from hot debris and sparks generated during welding, as well as from the heat from the welding process.

Comfort and Durability: The earmuffs are durable while also providing comfort for the user during extended periods of use.

The earmuffs are a practical addition to a welder's safety equipment, providing essential protection in a compact and easy-to-integrate design.

SNR:24dB