Mask filters

3M™ Particulate Filters 2135 offer P3 R protection against solid and liquid particles
Suitable for use with all 3M™ Reusable Half and Full Face Masks featuring the Bayonet Filter Connection System
Bayonet fitting allows filters to be clicked into place for ease of fitting

Note: Filters are in package of 2 pieces

3M™ 2138 Particulate Filters offer P3R protection from solid and liquid particles, organic and acid gases, vapors, and ozone up to 10 x TLV. In addition, against organic vapors and oxidized gases under OEL.
Suitable for use with all 3M ™ half and full face masks fitted with the Bayonet filter system

Note: Filters are in 2-piece package

Low profile and well balanced twin filter design
Suitable for use with 3M™ Half Face Respirators and Full Face Respirators

Provides protection against: Organic Vapours (boiling point > 65ºC) (A1). Use for protection during spraying of conventional paints - Use of solvents, agricultural works, typography. Maximum concentration 1000ppm, 10xTLV
Note: Filters are in 2-piece package

Low profile and well balanced twin filter design
Suitable for use with 3M™ Half Face Respirators and Full Face Respirators

Provides protection against: Organic Vapours (boiling point > 65ºC) (A2). Use for protection during spraying of conventional paints - Use of solvents, agricultural works, typography. Maximum concentration 1000ppm, 10xTLV
Note: Filters are in 2-piece package

Low profile and well balanced twin filter design
Suitable for use with 3M™ Half Face Respirators and Full Face Respirators

Filters ABE1 for organic vapors (boiling point above 65 ° C), inorganic and acidic gases. Use in plumbing, battery construction, welding, base metals, electronics. Concentration 1000ppm, 10xTLV
Common Applications/Hazards: For protection when working with solvents and/or acid gases, e.g. Toluene, chlorine, sulphur dioxide and hydrochloric acid
Note: Filters are in 2-piece package

Filter ABEK1 for organic vapors bp>65 degrees°C, inorganic and acid gases, ammonia and its derivatives.

Low profile and well balanced twin filter design
Suitable for use with 3M™ Half Face Respirators and Full Face Respirators

Use of bleach, bleach, hydrogen chloride, sulfur dioxide, chemical vapors applied to cleaning services, incineration
Note: Filters are in 2-piece package

3M™ Bayonet Gas, Vapour and Particulate Filters are CE approved and conveniently provide protection against a wide range of gases, vapours and particulates depending on the model selected. They have a bayonet-style connection that fits any 3M™ Bayonet Reusable Respirator and they’re designed to optimise your field of vision. These filters offer lightweight and well-balanced breathing protection for a wide range of hazardous environments.

CE approved to protect against a range of gases, vapours and particulates depending on the model selected
Bayonet-style connection fits a wide range of compatible half and full facepiece 3M™ Reusable Respirators
Swept-back, low profile design for optimised field of view and balance
Lightweight with low breathing resistance
Quarter turn twist for a quick and easy installation
Wide range of applications may reduce inventory needs
Use for protection in hazardous environments . For workplace/occupational use only.

3M™ Gas, Vapor and Particulate Filters have a bayonet-style connection that fits a wide range of compatible half and full-face 3M™ Reusable Masks. The swept back profile is designed to optimize your field of vision. Our range of lightweight filters offer well-balanced breathing protection for hazardous environments.

Protects against a range of vapours, gases and particulates
Combines protection with comfort and balance
Low profile design to optimise your field of vision
Lightweight with low breathing resistance
Bayonet-style connection fits a wide range of compatible half and full-face 3M™ Reusable Masks
Twist and click for a quick and easy fit
Suitable for half and full-face 3M™ Reusable Masks with a bayonet-style connection

3M™ Particulate Filter 6035 offers P3 R protection against solid and liquid particles. The hard plastic casing is ideal for rough applications where there is a need for easy decontamination and protection.

3M™ Particulate Filter 6035 provides P3 R protection against solid and liquid particles R, supplied with plastic cage for rough applications
Lightweight, low breathing resistance, well balanced when fitted to mask
Provides excellent field of vision as a result of the unique trapezoidal shape
Suitable for use with 3M™ all 3M™ Reusable Half and Full Face Masks featuring the Bayonet Filter Connection System

The 3M 6038 filters are built for durability with a spark-resistant outer casing and are great for working with hydrogen fluoride and toxic particles.

Protective casing deflects sparks and splashes
Provides protection against Particulates, Hydrogen Fluoride, Nuisance Level* Organic Vapour and Acid Gas
Suitable for use when working with hydrogen fluoride and toxic particles
Compatible with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators.

Replacement Faceshield Cover to protect the lens of the full face mask 6800.

The price listed is per item

The 3M™ Filter Adapter 603 is used with 3M™ Particulate Prefilter 5911, 5925, 5935 and 3M™ Filter Retainer 501.The 3M™ Filter Adapter 603 enables the 3M™ Particulate Prefilters to be directly attached to all bayonet style 3M™ Half or Full Facepiece Respirators. The 3M™ Filter Adapter 603 may be used multiple times. Replacement part can extend respiratory equipment service life.

3M™ Particulate Prefilters 5911 P1 can be attached to 3M™ Bayonet Gas & Vapour Filters 6000 series to provide particulate protection from certain solid and liquid particles. Use the 3M™ Filter Retainer 501 to attach one filter to each gas/vapour filter.3M™ Particulate Prefilters 5911 P1 for 3M masks: 6200,6502,7502,6800

CE approved for environments containing particulates
Use with 3M™ Gas and Vapor Cartridges, 6000 Series or 3M™ Filter Adapter 603
Held in place by required 3M™ Filter Retainer, 501
Allows for replacement of particulate filters prior to change out of gas & vapour filters for cost savings
Filters can help reduce inhalation exposures to a wide range of dusts, mists and other particles, including certain airborne biological particles
Advanced Electret Media (AEM) is designed to provide lightweight, easy breathing comfort
Simple to install
Use for protection in hazardous environments.
For workplace/occupational use only

3M™ Particulate Prefilters 5911 P1 for 3M masks: 6200,6502,7502,6800

3M™ Particulate Prefilters 5925 P2 can be attached to 3M™ Bayonet Gas & Vapour Filters 6000 series to provide particulate protection from certain solid and liquid particles. Use the 3M™ Filter Retainer 501 to attach one filter to each gas/vapour filter.3M™ Particulate Prefilters 5925 P2 for 3M masks: 6200,6502,7502,6800

CE approved for environments containing particulates
Use with 3M™ Gas and Vapor Cartridges, 6000 Series or 3M™ Filter Adapter 603
Held in place by required 3M™ Filter Retainer, 501
Allows for replacement of particulate filters prior to change out of gas & vapour filters for cost savings
Filters can help reduce inhalation exposures to a wide range of dusts, mists and other particles, including certain airborne biological particles
Advanced Electret Media (AEM) is designed to provide lightweight, easy breathing comfort
Simple to install
Use for protection in hazardous environments.
For workplace/occupational use only

3M™ Particulate Prefilters 5925 P2 for 3M masks: 6200,6502,7502,6800

3M™ Particulate Prefilters 5935 P3 can be attached to 3M™ Bayonet Gas & Vapour Filters 6000 series to provide particulate protection from certain solid and liquid particles. Use the 3M™ Filter Retainer 501 to attach one filter to each gas/vapour filter.

CE approved for environments containing particulates
Use with 3M™ Gas and Vapor Cartridges, 6000 Series or 3M™ Filter Adapter 603
Held in place by required 3M™ Filter Retainer, 501
Allows for replacement of particulate filters prior to change out of gas & vapour filters for cost savings
Filters can help reduce inhalation exposures to a wide range of dusts, mists and other particles, including certain airborne biological particles
Advanced Electret Media (AEM) is designed to provide lightweight, easy breathing comfort
Simple to install
Use for protection in hazardous environments.
For workplace/occupational use only

3M™ Particulate Prefilters 5935 P3 for 3M masks: 6200,6502,7502,6800

The 3M™ 501 pre-filter cap is used to keep the P1, P2SL, and P3SL pre-filters in place at the front of the mask.
Note: The covers are in a 2-piece package

Replacement Exhalation valve for full face mask 6800

3M™ Reusable Respirators are designed to be reused many times and a range of spare parts is available to help keep your respirators in good working order. Replacement head harness assemblies are available for 3M™ Reusable Respirators 6000 Series.



 
Compatible with 6100, 6200 & 6300.

3M™ 6581 Replacement retaining straps for half face mask 6502

3M™ 7581 Replacement retaining straps for half face mask 7502-7503

Replacement retaining straps for the full face mask 6800

Using the 3M™ 6893 Inhalation Valve, the lifetime of the respiratory protection device can be extended. Compatible with full-face 6800 masks.

Replacement part for full face mask 6800

3M™ 6895 Replacement ring for full face mask 6800