SATIN MACHINE

Hard Rubber Wheel For Satin Machine Dimentions: 100mm x286mm

Inflatable satinier rubber for sanding and finishing surfaces where special care is required.
Dimensions: 90mm X 100mm X 19mm

3M Precision-Shaped Grain blend provides significantly longer life than comparable aluminum oxide belts
Proprietary mineral provides consistent, faster results on medium pressure applications, helping to improve productivity and throughput
Reduces changeouts and downtime in robotic and pressure-assisted applications
Moderately flexible backing provides conformability for grinding and blending both straight and contoured surfaces
YF-weight polyester backing is used for Grades 36-80, while lighter XF-weight polyester backing is used for Grades 120-180
Grinding aid cools abrasive processes on heat-sensitive alloys
Suitable for wet and dry applications on all metals
Durable resin bond resists deterioration from heat, extending the life of the belt

3M™ Trizact™ Cloth Belt 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

Self-sharpening pyramids start sharp, stay sharp, and run cooler than conventional abrasives
Flexible backing for consistent finish over contours
Three-dimensional design enables very consistent finishes throughout the abrasive life in robotic applications
For intermediate finishing and fine polishing prior to plating or buffing
Produces finer finishes than conventional electrostatically coated abrasives

The Scotch-Brite™ Surface Conditioning Low Stretch Belt balances durability with flexibility, it's a good match for cleaning, finishing and light deburring applications. It performs best on steel and stainless steel, carbon, titanium and nickel alloys, but it may also be used on aluminum, copper, brass and soft, non-ferrous metals

Durable cloth / polyester scrim backing is ideal for low-stretch applications
May be used on a variety of substrates, from stainless steel to brass
Available in a variety of minerals, grades and belt types, so operators can choose the right combination for their application
Springy non-woven nylon fibers finish while maintaining the geometry of the piece
Open web is load resistant, prolonging abrasive service life

The new non-woven SF-FB is a high density abrasive material suitable for metal finishing and deburring applications.This new flap brush has outstanding wear resistance on  irregular and sharp surfaces.Designed to apply or restore the original satin finish throughout the life of the brush.

Description:
This High Performance Nonwoven material is converted into wheels with a split pin hole for satin finish machines.
 
Main features and benefits:
These nonwoven wheels with a hole offer consistent finishing quality, highly efficient ventilation, flexibility, excellent user friendliness, low-noise levels and resistance to clogging. They can be cleaned using compressed air or water. The abrasive tool is efficiently driven by means of a unique 4-split-pin system and can be quickly fit.
 
Recommended applications:
Light deburring and cleaning. Satin finishing small and large surfaces. Removing scale. Removing marks left by previous operations and re-finishing after bending, welding or satin coil moulding.
 
Work surfaces:
Stainless steel, standard or alloyed steel, nonferrous metals and alloys, aluminium, cast iron, titanium, plastic.

This High Performance Nonwoven and cloth material is converted into wheels with a split pin hole for satin finish machines.
 
Main features and benefits:
These wheels offer better cutting performance than nonwoven wheels whilst ensuring high finishing quality and excellent user friendliness combined with highly efficient ventilation and low-noise levels typical of nonwoven products. Thanks to a unique 4-split-pin system, the abrasive tool can be efficiently driven and quickly fit.
 
Recommended applications:
Light deburring and cleaning. Satin finishing small and large surfaces. Removing scale. Removing marks left by previous operations.
 
Work surfaces:
Stainless steel, standard or alloyed steel, nonferrous metals and alloys, aluminium, cast iron, titanium.

Description:
Aluminium oxide cloth, X Flex weight.
 
Main features and benefits:
Excellent combination of user friendliness and durability. The cloth used ensures a perfect balance of flexibility and strength. The abrasive tool is efficiently driven by means of a unique 4-split-pin system.
 
Recommended applications:
Finishing large flat, concave or convex surfaces. grinding the inner and outer surfaces of tanks and containers. Removing and cleaning weld beads. 
 
Work surfaces:
Stainless steel, standard steel, alloyed steel, aluminium, titanium, nonferrous materials and alloys, plastic, plastic reinforced by fibre glass, marble, stone.

Flexible felt satin brush 100x100  that helps prevent overheating and adapts to the surface ensuring a soft and controlled finish.