List of products by brand 3M

The 3M ™ Reusable Mask 6200 is economical, with low maintenance requirements, easy to use and very light.
Filter 6057 ABE1 protects against organic vapors with a boiling point> 65 ° C when working with solvents and acid gases, e.g. chlorine, sulfur dioxide and hydrochloric acid. Concentration 1000ppm, 10xTLV
The 5925 P2R particle pre-filter protects against solid and liquid particles
They are applied on the filters with the help of the retaining ring 3M ™ 501

The 3M ™ Reusable Mask 6200 is economical, with low maintenance requirements, easy to use and very light.
Filter 6059 ABEK1 protects against organic vapors, boiling point> 65 ° C, inorganic vapors, acid gases, ammonia and its derivatives
The 5935 P3R particle pre-filter protects against solid and liquid particles
They are applied on the filters with the help of the retaining cap 3M ™ 501

The 3M ™ Reusable Mask 6200 is economical, with low maintenance requirements, easy to use and very light.
Filter 6055 A2 protects against organic gases & vapors, boiling point> 65 ° C, Protection when spraying paints based on solvent, for use of solvent, resin and glue
The 5911 P1R particle pre-filter protects against solid and liquid particles.
They are applied on the filters with the help of the retaining ring 3M ™ 501

The 3M ™ Reusable Mask 6200 is economical, with low maintenance requirements, easy to use and very light.
Filter 6051 A1 protects against organic gases & vapors, boiling point> 65 ° C.
The 5911 P1R particle pre-filter protects against solid and liquid particles.
They are applied on the filters with the help of the retaining ring 3M ™ 501

The 3M ™ Reusable Mask 6200 is economical, with low maintenance requirements, easy to use and very light.
Filter 6055 A2 protects against organic gases & vapors, boiling point> 65 ° C, Protection when spraying paints based on solvent, for use of solvent, resin and glue
The 5911 P1R particle pre-filter protects against solid and liquid particles.
They are applied on the filters with the help of the retaining ring 3M ™ 501

The 3M ™ Reusable Mask 6200 is economical, with low maintenance requirements, easy to use and very light.
Filter 6057 ABE1 protects against organic vapors with a boiling point> 65 ° C when working with solvents and acid gases, e.g. chlorine, sulfur dioxide and hydrochloric acid. Concentration 1000ppm, 10xTLV
The 5925 P2R particle pre-filter protects against solid and liquid particles
They are applied on the filters with the help of the retaining ring 3M ™ 501

The 3M ™ Reusable Mask 6200 is economical, with low maintenance requirements, easy to use and very light.
Filter 6059 ABEK1 protects against organic vapors, boiling point> 65 ° C, inorganic vapors, acid gases, ammonia and its derivatives
The 5935 P3R particle pre-filter protects against solid and liquid particles
They are applied on the filters with the help of the retaining cap 3M ™ 501

3M ™ Reusable Half Face Masks 6500 Series are designed for harsh and dirty work environments.

Quick lock lowering mechanism for easy application and removal when users enter and exit contaminated areas
Durable silicone mask contributes to comfort, durability & stability with soft yet firm sealing
Exhaust valve cover helps direct exhaled air and moisture down, reducing blur on glasses and grinding and welding shields
The low profile design of the half face mask offers a wider field of view and better compatibility with welding and sanding shields
3M ™ Cool Flow ίδα Valve provides easier breathing and reduced heat and humidity accumulation
The adjustable head strap arrangement offers improved fit and comfort
Bayonet Filter Fastening System, which allows connection to a wide range of filters for protection against gases, vapors and particles

3M Reusable Full Face Mask 6800 with low maintenance design, for maximum comfort and simplicity in use
Filter 6057 ABE1 protects against organic vapors with a boiling point> 65 ° C when working with solvents and acid gases, e.g. chlorine, sulfur dioxide and hydrochloric acid. Concentration 1000ppm, 10xTLV
The P2R particle pre-filter protects against solid and liquid particles

3M 68 Reusable Full Face Mask 6800 with low maintenance design, for maximum comfort and simplicity in use

Large polycarbonate lenses, for a wide field of view and excellent visibility
Dual filter design, offering lower resistance to breathing
Extremely light: 450 grams. Made of soft hypoallergenic elastomeric material



The Formaldehyde Filter A2B2E2K2HgP3 R + protects against organic vapors> 65 ° C, inorganic vapors, acid gases, ammonia and its derivatives, mercury, formaldehyde up to 10 ppm and particles.
Built-in P3 level protection particle filter (50xEOE) for maximum protection (5000ppm)

3M Full Protection set with Half Face Mask 6200 with Filters 6059, Pre-Filters 5925 & Safety Glasses 2890
Get complete protection with the 6200 half face mask set, equipped with 6059 filters for organic and inorganic vapors, 5925 pre-filters for particles, and 2890 safety glasses for maximum safety.Ideal for professional and industrial use, it ensures comfort, a secure fit, and high durability.Protect yourself in the most reliable way from hazardous chemicals and smoke.

The 3M ™ Reusable Mask 6200 is economical, with low maintenance requirements, easy to use and very light.
Filter 6051 A1 protects against organic gases & vapors, boiling point> 65 ° C.
The 5911 P1R particle pre-filter protects against solid and liquid particles.
They are applied on the filters with the help of the retaining ring 3M ™ 501

The 3M ™ Reusable Mask 6200 is economical, with low maintenance requirements, easy to use and very light.
3M ™ 2135 particle filters offer P3 R protection against solid and liquid particles

The 3M ™ Reusable Mask 6200 is economical, with low maintenance requirements, easy to use and very light.
Particle filters 3M ™ 2138 offer P3 R protection against solid and liquid particles, organic and acid gases, vapors and ozone up to 10 x TLV. In addition, against organic vapors and acid gases under OEL.

Scotch-Brite™ Hand Pads pre-cut on a roll, combines flexibility with effective cutting action and precise hand control to accomplish tough cleaning jobs or produce fine finishing results, use after use. Very fine grade aluminum oxide abrasives cut fast and fine, leaving a smooth, finished surface.

·        Superior alternative to steel wool, wire brushes, sandpaper, and other nonwoven products for cleaning or finishing tasks

·        Cleans, finishes, grains, denibs, and defuzzes

·        Suitable for use on wood, metal, plastics, ceramics, porcelain, glass, rubber, or composites

·        Reusable pad resists tearing, splintering, shredding, loading and will never rust, providing a long, useful life

·        Performance similar to steel wool grade 4 without shredding, rusting, or splintering

Scotch-Brite™ Surface Conditioning Belt is a durable belt engineered to perform detail work such as blending, blending corners, cleaning, contour finishing, deburring, deburring edges, fine finishing, flat finishing, setting the grain, stainless steel finishing, and attaining straightline-brushed finishes on a variety of metals.

Nonwoven, surface conditioning belts clean, blend, deburr and finish
Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results
Conformability allows abrasive to stay in contact with complex-shaped parts in robotic processing
Reinforced backing and nonwoven open web material provide superior flexibility for detail work, over contours and edges
Removes surface imperfections, grind lines, mill, and other marks

Used to hold 3M ™ Secure Click ™ D7915, D7925, D7935 particle pre-filters in place on 3M ™ Secure Click D filters D8081, D8055, D8059. For use with the 3M ™ Secure Click H HF-800 Masks.

The 3M ™ Secure Click ™ Reusable Half Face Mask HF-802 with Speaking diaphragm, designed to provide easier communication at work
Greater breathing comfort and permeability, provided by the world's first quad-flow filter system
The 3M ™ Secure Click. Particle Filter P3 R, D3138 has CE certification for environments with specific particles. Our filter can also be used to protect against unpleasant levels of organic vapors and ozone up to 10 times the Permissible Exposure Limit (OEL).

The 3M ™ Secure Click Reusable Half Face Mask HF-802 with Speaking diaphragm, designed to provide easier communication at work
Greater breathing comfort and permeability, provided by the world's first quad-flow filter system
The 3M ™ Secure Click ™ Filter A1, D8051 has Protection against specific organic vapors with a boiling point above 65 ° C
The 3M ™ Secure Click Particle Filter P1 R, D7915 is CE certified for environments with specific solid and liquid particles
3M ™ Secure Click ™ D701 Used to hold 3M ™ Secure Click ™ Particle Pre-Filters

For charging 3M™ Versaflo™ Powered Air Turbo TR-600 Series batteries, use 3M™ Versaflo™ Battery Charger Kit, TR-641E. Our kit charges 3M™ Versaflo™ Battery, Standard, TR-630 or 3M™ Versaflo™ Battery, High Capacity, TR-632 one at a time in less than four hours. The battery can then be stored in the cradle once fully charged. The kit comes with a charging cradle, power supply and lead.


Charges in under four hours.


Designed for use with 3M™ Versaflo™ Battery, Standard, TR-630 or 3M™ Versaflo™ Battery, High Capacity, TR-632.


Charges one battery at a time.


Store fully-charged batteries on charger, ready for immediate use.


CE approved.

The filter cover TR-371 is a replacement part for the 3M Versaflo TR-300 PAPR. The filter cover provides protection for the filter and provides a housing for a pre-filter and/or a spark arrestor

The 3M Xtract™ Pneumatic Random Orbital Sander is a key component of the 3M Xtract™ Sanding System. Along with 3M Xtract™ Net Discs and the 3M Xtract™ Portable Dust Extractor, this powerful 0.28 HP (209W) sander helps enable virtually dust-free sanding.

Lightweight, comfortable design with soft touch grip with moulded-in grip features
Powerful 0.28 HP (209W) pneumatic motor
Stays cool and comfortable while running
Three variable speed settings

 Suggested Applications

Metal fabrication
Primer sanding
Gelcoat sanding
Woodworking

Premium net disc allows for virtually dust-free sanding
3M Precision-Shaped Grain arranged in a unique pattern delivers industry-leading cut-rate and long life
Part of the 3M Xtract™ Clean Sanding Solutions, the ultimate in dust removal and performance
Allows for a cleaner work environment than traditional discs with dust extraction holes
Hook-and-loop backing for quick and easy disc changes
Ideal for a wide variety of substrates and applications including stock removal and fine finishing
Available in a range of grades from 80+ to 320+

Featured Applications

Metal fabrication
Primer sanding
Gelcoat sanding
Composite sanding
Woodworking

Strike the balance of dust extraction and abrasive performance with 3M Xtract™ Net Disc 310W. This Advanced Series sanding disc features a net backing that enables virtually dust-free sanding, with fast-cutting, long-lasting 3M™ Precision-Shaped Grain technology. These technologies allow you to boost productivity without sacrificing worker health.

Advanced Series net disc delivers virtually dust-free sanding at a value price
Features 3M™ Precision-Shaped Grain mixed with premium aluminum oxide abrasive for a fast cut and long life
Part of the 3M Xtract™ Series, the ultimate in dust removal and performance
Allows for a cleaner work environment than traditional discs with dust extraction holes
Hook-and-loop backing for quick and easy disc changes
Ideal for a wide variety of substrates and applications including stock removal and fine finishing
Available in grades 80+,120+,150+,180+,220+,240+,320+