Speedglas

The filter cover TR-371 is a replacement part for the 3M Versaflo TR-300 PAPR. The filter cover provides protection for the filter and provides a housing for a pre-filter and/or a spark arrestor

The TR-325 is a economical, easy-to-use web belt for use with the 3M™ Versaflo™ TR-300 PAPR.

Economical and easy to use
Approximately 64 inches
Polyester

TR-329 Suspenders are designed for use with all 3M™ Versaflo™ TR-300 and Speedglas™ TR-300-SG belts.

For use with certain 3M Versaflo TR-300 PAPR configurations
May reduce weight of blower unit around the waist

3M™ Versaflo™ Cleaning & Storage Kit, TR-653 is our kit to assist with safely cleaning and storing 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series. It comes with one inlet plug and two inlet seals, one outlet plug and two outlet seals, and one battery connector cover.

Enables cleaning and storing 3M™ Versaflo™ Powered Air Turbo TR-600 and TR-800 Series unit easier
Kit comes with one inlet plug, two inlet seals, one outlet plug, two outlet seals, and one battery connector cover
Turbo plugs allow turbo unit TR-600 to be submerged or rinsed under running water as outlined in the user instructions
Plugs can help keep the internal components of the turbo clean during storage
Plugs and seals should be replaced when worn or damaged or after 30 uses

Designed to be used with our TR-600 and TR-800 Series Powered Air Purifying Respirators (PAPRs), these filters help provide respiratory protection from a broad range of airborne including certain particulates.

High efficiency filter
Convenient package size
Simple to install.

The TR-632 is a light weight, high capacity, lithium-ion battery pack for TR-600 series PAPRs. It charges quickly, and features a charge level indicator.

Long run time for filters and cartridges.
Provides longer run times than standard battery.
Rinsable
Dunkable for easy cleaning.
Easy determination of charge level.
Easy to install on PAPR.

3M™ Speedglas™ Headband 100/9000/SL, 706000 is designed for use with 3M™ Speedglas™ Welding Helmets 100, 9000, 9002NC and SL. Our spare part replaces worn or damaged headband assembly parts.

Replaces worn or damaged headband assembly parts
For use with 3M™ Speedglas™ Welding Helmets 100, 9000, 9002NC or SL
Ensures you get the correct level of comfort and protection
Check your equipment regularly to increase service life
Use for welding applications

pack of 5.
Inside cover lenses protect the inside of the 3M Speedglas helmet welding lens from scratches,sweat,wear & tear
Recommended replacement time is once a month depending on use.
Suitable for use with the Speedglas 9100V
Πλάκα σήμανσης 117x50.

Powered Air Turbo Starter Kit, TR-819E3M™ Versaflo™ Intrinsically Safe Powered Air Turbo Starter Kit TR-819E is our handy kit that’s approved to Zone 0 requirements and so may be suitable for areas where potentially explosive atmospheres are expected and permanent within normal operations. It’s ready-to-use and has everything you need to get started. The TR-819E kit is approved for use with a wide range of Versaflo™ Soft Headtops S Series and Rigid Headtops M Series, and is ATEX certified and CE approved.
The starter kit includes:

Safe motor/blower (TR-802E)
Safe battery (TR-830)
Battery attachment tool (TR-838)A
Airflow indicator (TR-971)
Easy clean belt (TR-627)
Length adjusting breathing tube (BT-30)
A2P filter (TR-6310E), filter cover (TR-6300FC)
Pre-filters (TR-6600)
Single station battery charger (TR-641E)

For charging 3M™ Versaflo™ Powered Air Turbo TR-600 Series batteries, use 3M™ Versaflo™ Battery Charger Kit, TR-641E. Our kit charges 3M™ Versaflo™ Battery, Standard, TR-630 or 3M™ Versaflo™ Battery, High Capacity, TR-632 one at a time in less than four hours. The battery can then be stored in the cradle once fully charged. The kit comes with a charging cradle, power supply and lead.


Charges in under four hours.


Designed for use with 3M™ Versaflo™ Battery, Standard, TR-630 or 3M™ Versaflo™ Battery, High Capacity, TR-632.


Charges one battery at a time.


Store fully-charged batteries on charger, ready for immediate use.


CE approved.

Get protection against, mists, fumes, gas and vapours (or a combination of these hazards) with 3M™ Versaflo™ Powered Air Respirator Filters, TR-600 & TR-800 Series. Our filters are designed to be used with 3M™ Versaflo™ Powered Air Turbos TR-600 & TR-800 Series and are CE approved. Filters are easy to connect to the turbo unit and the 3M™ Versaflo™ Powered Air Respirator.
TR-6130E - ABE1P - For protection against organic vapours, inorganic vapours, acid gases, dusts, mists, fumes and particulates.

Replacement spare part to the original visor plate if any pits or scratches occur
For maximum safety and comfort, make it a habit to check your equipment regularly. Replace worn out or damaged parts
Regularly clean with a soft cloth and replace if any pits or scratches occur
For use with 3M™ Speedglas™ Welding Helmet G5-01

3M™ Face Seals are designed for use with 3M™ Air Feed welding helmets. This spare part replaces worn, damaged or unhygienic face seals. These spare parts replace worn, damaged or unhygienic face seals.  For maximum safety and comfort, regularly check your equipment for worn or damaged parts.





For use with 3M™ Speedglas™ Air Fed welding helmets.
Original 3M™ Accessory.
Replaces worn or damaged part.
For highest possible safety and comfort, regularly check your equipment for worn or damaged parts.

3M™ Versaflo™ Prefilter, TR-6600 is our prefilter which captures larger particles which may otherwise quickly clog 3M™ Versaflo™ Powered Air Turbo TR-600 Series particulate filters. It can be used with 3M™ Versaflo™ Spark Arrestor, TR-662 for additional protection.

Can extend the service life of TR-600 Series filters by capturing large particles
May reduce operating costs by extending the service life of TR-600 Series filters
Can be used in conjunction with a 3M™ Versaflo™ Spark Arrestor, TR-662
Maintenance free and should be discarded if clogged or damaged
Regular prefilter changeouts can improve system performance and may increase battery life


*Pack of 10

3M™ Versaflo™ Filter Cover, TR-6100FC is our filter cover to help protect 3M™ Versaflo™ TR-6110E and TR-6130E filters from physical damage.

Protects your 3M™ Versaflo™ TR-6110E and TR-6130E filters from physical damage.
Holds a 3M™ Versaflo™ Spark Arrestor, TR-662 or 3M™ Versaflo™ Prefilter, TR-6600 in place for further protection.
Enables 3M™ Versaflo™ Power Air Turbo to be worn through decontamination showers.
Enables turbo to be worn through decontamination showers.

3M™ Versaflo™ Peel-Off Visor Cover, Premium Hoods, S-922 is our transparent peel-off visor cover for use with 3M™ Versaflo™ Series S-600, S-700 and S-800 premium head covers and hoods. This self-adhesive cover protects the visor from contaminants and scratches. 

Protect visors from contaminants and scratches.
For use with 3M™ Versaflo™ S-600, S-700 and S-800 premium headcovers and hoods.
Prolong the condition of your visor.
Self-adhesive cover can be easily applied and torn off.

* 10 Piece per pack

3M™ Versaflo™ Flame Resistant Faceseal, M-937 is our replacement flame-resistant faceseal designed for use with 3M™ Versaflo™ M-100, M-200 and M-300 Series.





Replacement faceseal
Flame resistant
Easy to replace
Designed for use with 3M™ Versaflo™ M-100, M-200 and M-300 Series
Colour: Black
CE approved

3M™ 834010 Replacement breathing tubes for 3M™ Speedglas™ Supplied Air System and 3M™ Adflo™ Powered Air Respirator.

Replacement breating tubes for 3M™ Welding Respiratory Equipment 
Connects welding helmet to the powered air purifying respirator or supplied air unit
For highest possible safety and comfort, regularly check your equipment for worn or damaged parts.

3M™ Speedglas™ Protective Head Cover can help provide extended protection for areas of the head and neck not covered by standard 3M™ Speedglas™ protective equipment.Compatible with Speedglas 100V & 9002NC.

3M™ Speedglas™ Protective Covers, Hoods, & Shrouds can help protect areas of the head and neck not covered by standard 3M™ Speedglas™ protective equipment.
Extended protection for the crown of the head, throat/neck, and/or ears during heavy welding or grinding applications.
Helps protect extended areas of the head and neck against UV light, sparks and spatter.
Accessories attach easily to 3M™ Speedglas™ Welding Helmets.
For assembly, facility maintenance, grinding, machine operations, sanding, and welding applications.
For highest possible safety and comfort, regularly check your equipment for worn or damaged parts.

3M™ Speedglas™ Protective Covers, Hoods, & Shrouds can help provide extended protection for areas of the head and neck not covered by standard 3M™ Speedglas™ protective equipment.

3M™ Speedglas™ Protective Covers, Hoods, & Shrouds can help protect areas of the head and neck not covered by standard 3M™ Speedglas™ protective equipment.
Extended protection for the crown of the head, throat/neck, and/or ears during heavy welding or grinding applications
Helps protect extended areas of the head and neck against UV light, sparks and spatter
Accessories attach easily to 3M™ Speedglas™ Welding Helmets 9100, 9002nc, 100v
For assembly, facility maintenance, grinding, machine operations, sanding, and welding applications
For highest possible safety and comfort, regularly check your equipment for worn or damaged parts

3M™ Adflo™ Leather Belt, 835000, is designed for 3M™ Adflo™ Powered Air Respirator. Our spare part replaces worn or damaged belts.

 Replaces worn or damaged 3M™ Adflo™ belt.
 Large surface area evenly distributes weight.
 Leather construction for increased durability.
 To increase service life, make it a habit to check your equipment regularly.
 For use with 3M™ Adflo™ Powered Air Respirator.

3M™ Speedglas™ 169100 Protective Hood/Shroud can help provide extended protection for areas of the head and neck not covered by standard 3M™ Speedglas™ protective equipment.

3M™ Speedglas™ Protective Covers, Hoods, & Shrouds can help protect areas of the head and neck not covered by standard 3M™ Speedglas™ protective equipment.
Extended protection for the crown of the head, throat/neck, and/or ears during heavy welding or grinding applications.
Helps protect extended areas of the head and neck against UV light, sparks and spatter.
Accessories attach easily to 3M™ Speedglas™ Welding Helmets.
For assembly, facility maintenance, grinding, machine operations, sanding, and welding applications.
For highest possible safety and comfort, regularly check your equipment for worn or damaged parts.

3M™ Speedglas™ Magnifying Lens Holders enables you to attach a magnifying lens (sold separately) to your 3M™ Speedglas™ welding filter. Our lens holder forms part of the complete helmet assembly for welding applications.
 

Easily and securely attaches a magnifying lens to your 3M™ Speedglas™ welding filter
Attaches a magnifying lens (sold separately) for a closer, clearer view of your weld
Forms part of the complete helmet assembly for welding applications
Part of a range of Speedglas welding helmet accessories that help ensure your protection and comfort

Safely carry and store your 3M Welding equipment with 3M Speedglas™ carry products.
Protect your welding respiratory system from scratches with 3M Welding

Protects against scratches, moisture and dust.
For highest possible safety and comfort, regularly check your equipment for worn or damaged parts
Carry or store your equipment for best comfort or care

3M™ Speedglas™ Heavy Duty Welding Helmet, G5-01TW is specifically designed for the heavy-duty welder. The helmets flip up functionality allows you to seamlessly switch between welding and grinding tasks while maintaining powered air respiratory protection.
With highly customizable adjustment settings, including more control over how you see your weld pool, how air is directed within your helmet and how you configure the helmet for additional protection against radiation, sparks and spatter, G5-01TW allow you to take control over your protection. 3M™ Speedglas™ Variable Color Technology with G5-01TW.
Basic Characteristics:

G5-01TW offers variable dark shades 5, 8-13 and tack welding comfort mode.
The big (104 x 170 mm), clear protective visor is curved, with excellent views up, down and peripherally.
For more control over your comfort, the innovative G5-01TW helmet airflow optimization system lets you direct the airflow to either your face, visor or somewhere in-between.
The slim profile and ergonomic design makes the G5-01TW helmet easier to utilize in tight welding spaces.
Suitable for most types of arc welding.

Filter Characteristics:
• Tack welding mode• Light state shade 3• Dark state 8-13• Optical class 1/1/1/1• 3M™ Speedglas™ Natural Colour Technology• Easy access to CUT mode shade 5• Locked dark state 8-13• Two step recovery• Four photo sensors• Bluetooth™ enabled ADF• Automatic ON/OFF